FAA issues nationwide flights ground stop ‘due to extraordinary circumstances' and ‘safety'

This can't be real... 😂

Great American Road Trip, Inc.—the 501(c)(4) social welfare organization that funded Transportation Secretary Sean Duffy’s cross-country video series—has not publicly filed an IRS Form 990 available in public nonprofit databases or the IRS registry. [1]

Looking forward to the 990.
 
Last edited:
From what I read yesterday, officials tracked part of the issue down to a router located in ELD (El Dorado, Arkansas). I have experienced in my own job what they are describing. And knew how to handle it.

I now have even more questions regarding this.
 
New gear sometimes doesn't play well with old infrastructure.


The problem first became apparent at Indianapolis Center, which monitors the airspace in northern Kentucky, southern Indiana, southern Ohio, and parts of West Virginia, when the personnel working at the site had trouble communicating with flight crews. The agency then went on a nationwide hunt for the glitch, and it soon found two possible sources — an FAA radio site in El Dorado, Arkansas and a radar site in Amarillo, Texas. Upon deeper inspection, the agency discovered that new routers recently installed in both places have begun sending out a high volume of data across the entire FAA communications network.

@AZ_HighCountry

Am I reading this right? - Numbnuts installed high speed routers BEFORE finishing replacing old copper wires with fiber optics?
 
Last edited:
New gear sometimes doesn't play well with old infrastructure.


The problem first became apparent at Indianapolis Center, which monitors the airspace in northern Kentucky, southern Indiana, southern Ohio, and parts of West Virginia, when the personnel working at the site had trouble communicating with flight crews. The agency then went on a nationwide hunt for the glitch, and it soon found two possible sources — an FAA radio site in El Dorado, Arkansas and a radar site in Amarillo, Texas. Upon deeper inspection, the agency discovered that new routers recently installed in both places have begun sending out a high volume of data across the entire FAA communications network.

@AZ_HighCountry

Am I reading this right? - Numbnuts installed high speed routers BEFORE finishing replacing old copper wires with fiber optics?
I'm still surprised how you can run assured networks on POTS. It blows my mind... 😂
 
From what I read yesterday, officials tracked part of the issue down to a router located in ELD (El Dorado, Arkansas). I have experienced in my own job what they are describing. And knew how to handle it.

I now have even more questions regarding this.
routers firmware are a nice thing to hack, unlike servers, desktops or smartphones/tablet devices, some could allow total control of the device.


check out openwrt project to know what a router firmware can do (everything) with the advantage of have total root control even to lowlevel hardware.

www.openwrt.org

and even when router is not compatible with openwrt, firmware can be modified to add new things (or to brick, freeze, the device, until a physical fitmware update with jtag).

it always was possible with suite tools like firmware-mod-kit, but nowadays it's even easier with AI grouping all those tools.

The same can be said about fridges hacking.


just running tcpdump in openwrt allows to wiretap whole connection.
 
Last edited:
I'm still surprised how you can run assured networks on POTS. It blows my mind... 😂
Well, to answer this as well as Davey's question, first, I am very familiar with Juniper hardware. We use them, and still do, at DHL. And yes, there was one occasion, can't remember the site now, may have been ATL or DFW, where was was described in the article happened in the facility.

For those interested, you can read the FAA Acting CTO's bio here:


I did. And, I can tell you right off the bat she failed. Bigly. As in an embarrassment to holding a PMP (which I do. A low 5 digit number at that.) as well as being trained in Computer Science. I'll bet RR's last Pakistani Rupee she forgot all about risk management and more importantly, didn't ask the right questions during the meetings with L3 or possibly even review their project plan. This is PM101 and she successfully managed to cost the aviation and associated industries hundreds of millions if not billions of dollars.

No one in their right mind brings new hardware on line unless it is determined the existing infrastructure can handle it or the new infrastructure was already in place. And, I'll bet there was no fail-over or redundancy in place.

If it were me doing a postmortem, I'd be asking a lot of hard and pointed questions. I have an people were very uncomfortable in those reviews.
 
New gear sometimes doesn't play well with old infrastructure.


The problem first became apparent at Indianapolis Center, which monitors the airspace in northern Kentucky, southern Indiana, southern Ohio, and parts of West Virginia, when the personnel working at the site had trouble communicating with flight crews. The agency then went on a nationwide hunt for the glitch, and it soon found two possible sources — an FAA radio site in El Dorado, Arkansas and a radar site in Amarillo, Texas. Upon deeper inspection, the agency discovered that new routers recently installed in both places have begun sending out a high volume of data across the entire FAA communications network.

@AZ_HighCountry

Am I reading this right? - Numbnuts installed high speed routers BEFORE finishing replacing old copper wires with fiber optics?
high or low speed routers, but where it come that flux of information? doesnt it exist previously?

if previously the routers were lower speed, so how they manage the amount of information needed to transmit?
 
high or low speed routers, but where it come that flux of information? doesnt it exist previously?

if previously the routers were lower speed, so how they manage the amount of information needed to transmit?
What @Davey Crockett means is Copper circuit can only support data streams of upto 56k on plain copper, 128k and 256k on dsl and upto 16mbps downstream on ADSL.

Assured routers and end points are full ethernet meaning synchronous downstream of 1gbps and greater.

Deploying a Juniper Ethernet router onto a POTS copper circuit is like giving a NASA astronaut a state-of-the-art spacesuit and sending them into orbit using a garden hose.
 
Some of you may recall I am now almost 2 years fully retired. Davey's TH article prompted me to do a quick search. I am now aware Juniper was acquired by HPE in July 2025. I wonder how much of the legacy Juniper talent was retained.

We had plenty of issues with HPE back when I was still an IT director to the point I received a call directly from the Executive VP of Global Procurement in Bonn because Christine Wittman complained to the then CEO about me. By name.

I explained the parts of the story to him that she conveniently left out in her whining to the CEO and was it too much to actually expect the vendor, with whom I was spending quite a bit of money with, to actually perform? He got it, and that was the last I heard about it. HPE also started to perform better in their deliveries.

Interestingly, it wasn't long after that where the IT procurement and technical teams in PRG started to evaluate Huawei and Dell servers. LOL.
 

Users who are viewing this thread

Pakistan Defence Latest

Country Watch Latest

Latest Posts

Back
Top