Yommie's Randoms

Status
Not open for further replies.
To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.
 
To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.
 

New procedure for testing drivers for intoxication to be introduced on 1 September​


New procedure for testing drivers for intoxication to be introduced on 1 September

From 1 September, a new procedure for the medical examination of drivers for intoxication will be introduced in our country. According to TASS, the procedure itself will remain unchanged: the driver\'s condition will still be determined by breath testing, the same testing devices (breathalysers)...
eng.autostat.ru eng.autostat.ru
 

Russia is considering car assembly in Kyrgyzstan​


Russia is considering car assembly in Kyrgyzstan

During the Kyrgyz-Russian Economic Forum, the potential supply and organisation of Russian car production in Kyrgyzstan was discussed. RIA Novosti reported this, citing a comment received from Roman Chekushov, Russia\'s Deputy Minister of Industry and Trade. Mr Chekushov said that several...
eng.autostat.ru eng.autostat.ru
 

Two LADA models presented in taxi versions​


Two LADA models presented in taxi versions

At the International Eurasian Taxi Forum (IETF-2025), AVTOVAZ showcased two vehicles designed for use as taxis. These are the LADA Iskra SW estate car in bright yellow and the white LADA Aura sedan with contrasting yellow elements, in accordance with the new taxi standards. Both models are...
eng.autostat.ru eng.autostat.ru
 

Kazakhstani automotive market sets a record in July 2025​


Kazakhstani automotive market sets a record in July 2025

According to the Kazakhstan Automobile Union (KAO), 20,165 new passenger and commercial vehicles were sold in July this year, which is 10.6% higher than a year ago. In the first seven months of this year, 125,034 new vehicles were sold in the republic — 23.4% more than in the same period last year.
eng.autostat.ru eng.autostat.ru
 

Sales of new pickups drops by 31% in July​


Sales of new pickups drops by 31% in July

According to AUTOSTAT data, 1,811 new pickups were sold in our country in July 2025. This represents a 31% decrease compared to July last year. The agency\'s experts have noted a decline in pickup truck sales in Russia for the past five months, i.e. since March. The most popular brand in this...
eng.autostat.ru eng.autostat.ru
 

Renault and Geely develop partnership based on Chinese GEA platform​


Renault and Geely develop partnership based on Chinese GEA platform

For the first time in its history, Geely is providing a third-party manufacturer with its own car production platform. This is part of a rapidly developing partnership with French Renault. According to Cenyavto.com portal, the Chinese manufacturer has already created several successful models...
eng.autostat.ru eng.autostat.ru
 
en.napinfo.ru

New processing centers have been installed at NEFAZ - NAPI

NAPI New processing centers have been installed at NEFAZ Modern processing centers have been installed at NEFAZ PTC, KAMAZ subsidiary in Bashkortostan, as part of a project aimed to increase production capacity.
en.napinfo.ru

2-n.png

18/08/2025
New processing centers have been installed at NEFAZ
Modern processing centers have been installed at NEFAZ PTC, KAMAZ subsidiary in Bashkortostan, as part of a project aimed to increase production capacity.

The company is currently implementing two large-scale investment projects. One of them is "Development of Production Capacity for the Production of Passenger Buses in PTC NEFAZ up to 3 Thousand Units per Year" project. As part of it, one horizontal and two vertical processing centers appeared in the blank preparation shop.

The horizontal milling processing center is located in the dumper production building, in machine assembly shop No. 6. This is a representative of modern metalworking centers. It is a two-pallet center that uses an improved T-type body, a gantry column and a suspended structure with increased rigidity and high balancing accuracy.

Vertical machining centers are also installed in machine assembly shop No. 6, in the production building for shift vehicles and tankers. They are high-precision equipment with a movable milling column with increased rigidity and an automatic pallet changing system for increasing production efficiency. Three-point support mechanism and reliable fixation of the workpieces make it possible to achieve high machining accuracy. A wide range of parts are manufactured there used in the production of passenger vehicles, such as brackets, base plates, spacers, handrail supports, etc.

NAPI (National Industrial Information Agency)
 
Status
Not open for further replies.

Users who are viewing this thread

Total: 11 (members: 0, guests: 11)

Pakistan Defence Latest

Country Watch Latest

Latest Posts

Share this page

Back
Top